DCN Wireless Access Point Dual Band 4x1000Mbps 1,775 Gbps Falra szerelhető, WL8200-XW24 DCN

Classification

Internal Access Point

Frequency band

2.4 GHz and 5 GHz

Ports

1 x 1000Base-T RJ45
2x 10/100/1000Base-T RJ45
4x 10/100/1000Base-T RJ45

PoE support

IEEE 802.3af (PoE)

Dimensions (width x height x depth)

160 mm x 86 mm x 35 mm

Operating Temperature

0|50 ?

Relative humidity

10|90 %

Protection mode

IP41

Maximum power consumption

? 12W

RF Management

Built-in antenna: 2.4GHz — 3dBi; 5GHz — 3dBi

Frequency Ranges

802.11a/n/ac: 5,150 GHz – 5,850 GHz 802.11b/g/n/ax: 2,4 GHz – 2,483 GHz 802.11ax: 5,150 GHz – 5,250 GHz 5,250 GHz – 5,350 GHz 5,725 GHz – 5,850 GHz

Modulations

802.11b: BPSK,QPSK,CCK 802.11a/g/n: BPSK, QPSK,16-QAM, 64-QAM 802.11ac:BPSK, QPSK,16-QAM, 64-QAM, 256-QAM 802.11ax: BPSK, QPSK , 16QAM, 64QAM, 256QAM, 1024QAM

Transmitting power

2,4GHz – 20dBm; 5GHz – 20 dBm

Power resolution adjustment

1 dBm

Virtual Access Point (BSSID)

32

Spatial Streams

1. module: 2.4GHz - 2; 2. module: 5GHz - 2

WLAN - informations

Dynamic Channel Adjustment (DCA), Transmission Power Control (TPC), Blind Spot Detection and Reduction, Hidden SSID, RTS/CTS, RF Environment Scanning, Hybrid Access, Limit Access for Number of Users, Link Integrity Control, Limit Access to Weak Signal Terminals, Forced Roaming of Terminals with Weak Signals, Intelligent Client Switching according to Airtime Fairness, High Density Application Optimization

11n Extensions

40MHz Channel, 300 Mbps (PHY), Frame Aggregation (A-MPDU), Maximum Reliability Demodulation (MLD), Transmission Beam Forming (TxBF), Maximum Splicing Ratio (MRC), Spatial Time Coding (STBC), Low Density Parity Check Code (LDPC)

Security

64/128 WEP, TKIP and CCMP encryption, IEEE 802.11i - WPA2, WAPI, MAC address authentication, LDAP authentication, PEAP authentication, WIDS/WIPS, Real-time spectrum protection, Anti-DOS for wireless management packets, Frame filtering, whitelist, static blacklist and dynamic blacklist, Access point forwarding blocking in the L2 range; Isolation between virtual access points (multiple SSIDs), Periodic switching on and off of SSIDs, Control access to free resources, Securing access control to terminals Wireless, Source Address Validation (SAVI), Access control for various data packets - IPv4 and IPv6 and MAC addresses, Access control security for access points, based on MAC authentication, password authentication or authentication of digital certificates between the access point and the controller

Redirects

Static IP Address Configuration or Address Assignment by Dynamic DHCP, IPv6 Redirects, IPv6 Portal, Local Forwarding, Multicast Transmission, Roaming, Access Point Switching Terms, WDS

About QoS

WMM, Priority Mapping, QoS Policy Mapping, L2-L4 Packet Filtering and Flow Classification, Load Balancing, Bandwidth Limit, Call Acceptance Control (CAC), Power Saving Mode, Automatic AP Failover, Intelligent Terminal Identification, Multicast Conversion to Unicast Transmission

Management

Centralized management via controller; “fit” and “fat” modes, Remote and local maintenance, Local logs, Syslog and logs exported to a file, Alarm, Damage detection, Switching between “fit” and “fat” modes, Remote probe analysis, Dual-image (Dual-OS), Watchdog